Service Manual

Parameters
console 0 Enter the keyword console 0 to configure the console port. The console option is
<0-0>.
vty number Enter the keyword vty then a number from 0 to 9 to configure a virtual terminal line for
Telnet sessions. The system supports 10 Telnet sessions.
end-number (OPTIONAL) Enter a number from 1 to 9 as the last virtual terminal line to configure. You
can configure multiple lines at one time.
Defaults Not configured
Command Modes CONFIGURATION
Command History
Version Description
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information You cannot delete a terminal connection.
Related Commands
show memory — view current memory usage on the M I/O Aggregator.
login concurrent-session
Configures the limit of concurrent sessions for all users on console and virtual terminal lines.
Syntax
login concurrent-session {limit number-of-sessions | clear—line enable}
no login concurrent session {limit number-of-sessions | clear—line enable}
Parameters
limit number-of-
sessions
Sets the number of concurrent sessions that any user can have on console and virtual
terminal lines. The range is from 1 to 12 (10 VTY lines, one console, and one AUX line).
clear-line enable
Enables you to clear your existing sessions.
Defaults Not configured. You can use all the available sessions.
Command Modes CONFIGURATION
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.8(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
You must have either the System Administrator or Security Administrator privileges to configure login concurrent-
session limit or to enable clear-line.
Use the login concurrent-session limit number-of-sessions command to limit the number of
concurrent sessions that any user can have on console, aux, and virtual terminal lines.
Control and Monitoring 91