Service Manual

show ip pim snooping tib
Display information from the tree information base (TIB) PIM-SM snooping discovered about multicast group members and states.
Syntax
show ip pim snooping tib [vlan vlan-id] [group-address [source-address]]
Parameters
vlan vlan-id (OPTIONAL) Enter a VLAN ID to display TIB information PIM-SM snooping discovered on
a specified VLAN. The valid VLAN IDs range is from 1 to 4094.
group-address (OPTIONAL) Enter the group address in dotted decimal format (A.B.C.D) to display TIB
information PIM-SM snooping discovered for a specified multicast group.
source-address (OPTIONAL) Enter the source address in dotted decimal format (A.B.C.D) to display TIB
information PIM-SM snooping discovered for a specified multicast source.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The following describes the show ip pim snooping tib commands shown in the following example.
Field Description
(S, G) Displays the entry in the PIM multicast snooping database.
uptime Displays the amount of time the entry has been in the PIM multicast route table.
expires Displays the amount of time until the entry expires and is removed from the database.
RP Displays the IP address of the RP/source for this entry.
flags List the flags to define the entries:
• S = PIM Sparse Mode
• C = directly connected
• L = local to the multicast group
• P = route was pruned
• R = the forwarding entry is pointing toward the RP
• F = Dell Networking OS is registering this entry for a multicast source
• T = packets were received via Shortest Tree Path
• J = first packet from the last hop router is received and the entry is ready to switch
to SPT
• K=acknowledge pending state
Incoming interface Displays the reverse path forwarding (RPF) interface towards the RP/ source.
RPF neighbor Displays the next hop from this interface towards the RP/source.
Outgoing interface
list:
Lists the interfaces that meet one of the following criteria:
• a directly connect member of the Group
956 PIM-Sparse Mode (PIM-SM)