Service Manual

Outgoing interface list:
TenGigabitEthernet 0/8
show running-config pim
Display the current configuration of PIM-SM snooping.
Syntax
show running-config pim
Command Modes EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#show running-config pim
!
ip pim snooping enable
Related Commands ip pim sparse-mode — enables PIM-SM snooping.
IPv6 PIM-Sparse Mode Commands
The following describes the IPv6 PIM-sparse mode (PIM-SM) commands.
ipv6 pim bsr-border
Define the border of PIM domain by filtering inbound and outbound PIM-BSR messages per interface.
Syntax
ipv6 pim bsr-border
Defaults Disabled.
Command Modes INTERFACE
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information This command is applied to the subsequent PIM-BSR messages. Existing BSR advertisements are cleaned up by
time-out.
ipv6 pim bsr-candidate
Configure the router as a bootstrap (BSR) candidate.
Syntax
ipv6 pim bsr-candidate interface [hash-mask-length] [priority]
To disable the bootstrap candidate, use the no ipv6 pim bsr-candidate command.
960 PIM-Sparse Mode (PIM-SM)