Administrator Guide

Figure 31. PFC and ETS Applied to LAN, IPC, and SAN Priority Trac
QoS Trac Classication: The service-class dynamic dot1p command has been used in Global Conguration mode to
map ingress dot1p frames to the queues shown in the following table. For more information, refer to QoS dot1p Trac Classication
and Queue Assignment.
dot1p Value in
Incoming Frame
Queue Assignment
0 0
1 0
2 0
3 1
4 2
5 3
6 3
242
Data Center Bridging (DCB)