Administrator Guide

• show run | grep Ethernet ignore-case returns instances containing both “Ethernet” and “ethernet.”

The grep command displays only the lines containing specied text. The following shows this command used in combination with

the

do show stack-unit all stack-ports pfc details | grep 0 command.

Dell(conf)#do show stack-unit all stack-ports all pfc details | grep 0

stack unit 0 stack-port all

0 Pause Tx pkts, 0 Pause Rx pkts

NOTE: The Dell Networking OS accepts a space or no space before and after the pipe. To lter a phrase with spaces,

underscores, or ranges, enclose the phrase with double quotation marks.

The except keyword displays text that does not match the specied text. The following example shows this command used in

combination with the

do show stack-unit all stack-ports all pfc details | except 0 command.

Example of the except Keyword

Example of the find Keyword

Dell(conf)#do show stack-unit all stack-ports all pfc details | except 0

Admin mode is On

Admin is enabled

Local is enabled

Link Delay 45556 pause quantum

stack unit 1 stack-port all

Admin mode is On

Admin is enabled

The find keyword displays the output of the show command beginning from the rst occurrence of specied text.

Dell(conf)#do show stack-unit all stack-ports all pfc details | find 0

stack unit 0 stack-port all

Admin mode is On

Admin is enabled

Local is enabled

Link Delay 45556 pause quantum

0 Pause Tx pkts, 0 Pause Rx pkts

stack unit 1 stack-port all

The no-more command displays the output all at once rather than one screen at a time. This is similar to the terminal length

command except that the no-more option aects the output of the specied command only.

The save command copies the output to a le for future reference.

NOTE: You can lter a single command output multiple times. The save option must be the last option entered. For

example:

Dell# command | grep regular-expression | except regular-expression | grep other-

regular-expression | find regular-expression | save.

Multiple Users in Conguration Mode

Dell Networking OS noties all users when there are multiple users logged in to CONFIGURATION mode.

A warning message indicates the username, type of connection (console or VTY), and in the case of a VTY connection, the IP

address of the terminal on which the connection was established. For example:

Conguration Fundamentals