Administrator Guide

telnet ipv6 address
– ipv6 address: x:x:x:x::x
– mask: prex length is from 0 to 128.
NOTE: IPv6 addresses are normally written as eight groups of four hexadecimal digits, where each group is separated
by a colon (:). Omitting zeros is accepted as described in
Addressing.
SNMP over IPv6
The simple network management protocol (SNMP) is supported on the MXL switch platform.
You can congure SNMP over IPv6 transport so that an IPv6 host can perform SNMP queries and receive SNMP notications from
a device running IPv6. The Dell Networking OS SNMP-server commands for IPv6 have been extended to support IPv6. For more
information regarding SNMP commands, refer to the SNMP and SYSLOG chapters in the Dell Networking OS Command Line
Interface Reference Guide.
• snmp-server host
• snmp-server user ipv6
• snmp-server community ipv6
• snmp-server community access-list-name ipv6
• snmp-server group ipv6
• snmp-server group access-list-name ipv6
Showing IPv6 Information
All of the following show commands are supported on the MXL switch platform.
View specic IPv6 conguration with the following commands.
• List the IPv6 show options.
EXEC mode or EXEC Privileged mode
show ipv6 ?
Example of show ipv6 Command Options
Dell#show ipv6 ?
accounting IPv6 accounting information
cam IPv6 CAM Entries
fib IPv6 FIB Entries
interface IPv6 interface information
mbgproutes MBGP routing table
mld MLD information
mroute IPv6 multicast-routing table
neighbors IPv6 neighbor information
ospf OSPF information
pim PIM V6 information
prefix-list List IPv6 prefix lists
route IPv6 routing information
rpf RPF table
Dell#
Showing an IPv6 Interface
To view the IPv6 conguration for a specic interface, use the following command.
• Show the currently running conguration for the specied interface.
EXEC mode
show ipv6 interface type {slot/port}
410
IPv6 Addressing