Administrator Guide

ManualsBrandsDell ManualsserversDell Force10 MXL Blade

471

472

473

474

475

476

477

478

479

480

Remote Chassis ID Subtype: Mac address (4)

Remote Chassis ID: 00:00:c9:b1:3b:82

Remote Port Subtype: Mac address (3)

Remote Port ID: 00:00:c9:b1:3b:82

Local Port ID: TenGigabitEthernet 0/2

Locally assigned remote Neighbor Index: 7

Remote TTL: 120

Information valid for next 105 seconds

Time since last information change of this neighbor: 1d21h56m

Remote System Desc: Emulex OneConnect 10Gb Multi function Adapter

Existing System Capabilities: Station only

Enabled System Capabilities: Station only

---------------------------------------------------------------------------

========================================================================

Local Interface Te 0/3 has 1 neighbor

Total Frames Out: 39165

Total Frames In: 40650

Total Neighbor information Age outs: 0

Total Multiple Neighbors Detected: 0

Total Frames Discarded: 0

Total In Error Frames: 0

Total Unrecognized TLVs: 0

Total TLVs Discarded: 0

Next packet will be sent after 4 seconds

The neighbors are given below:

-----------------------------------------------------------------------

Remote Chassis ID Subtype: Mac address (4)

Remote Chassis ID: 00:00:c9:ad:f6:12

Remote Port Subtype: Mac address (3)

Remote Port ID: 00:00:c9:ad:f6:12

Local Port ID: TenGigabitEthernet 0/3

Conguring LLDPDU Intervals

LLDPDUs are transmitted periodically; the default interval is 30 seconds.

To congure LLDPDU intervals, use the following command.

• Congure a non-default transmit interval.

CONFIGURATION mode or INTERFACE mode

hello

Example of Viewing LLDPDU Intervals

R1(conf)#protocol lldp

R1(conf-lldp)#show config

protocol lldp

advertise dot1-tlv port-protocol-vlan-id port-vlan-id

advertise dot3-tlv max-frame-size

advertise management-tlv system-capabilities system-description

no disable

R1(conf-lldp)#mode ?

rx Rx only

tx Tx only

R1(conf-lldp)#

mode tx