Administrator Guide

– event: view OSPF event messages.
– packet: view OSPF packet information.
– spf: view SPF information.
– database-timers rate-limit: view the LSAs currently in the queue.
Example of Viewing OSPF Conguration
Dell#show run ospf
!
router ospf 3
!
router ospf 4
router-id 4.4.4.4
network 4.4.4.0/28 area 1
!
router ospf 5
!
router ospf 6
!
router ospf 7
mib-binding
!
router ospf 8
!
router ospf 90
area 2 virtual-link 4.4.4.4
area 2 virtual-link 90.90.90.90 retransmit-interval 300
!
ipv6 router ospf 999
default-information originate always
router-id 10.10.10.10
Dell#
Sample Congurations for OSPFv2
The following congurations are examples for enabling OSPFv2.
These examples are not comprehensive directions. They are intended to give you some guidance with typical congurations.
You can copy and paste from these examples to your CLI. To support your own IP addresses, interfaces, names, and so on, be sure
that you make the necessary changes.
Basic OSPFv2 Router Topology
The following illustration is a sample basic OSPFv2 topology.
558
Open Shortest Path First (OSPFv2 and OSPFv3)