Administrator Guide

Additional MIB Objects to View Copy Statistics
Dell Networking provides more MIB objects to view copy statistics, as shown in the following table.
Table 60. Additional MIB Objects for Copying Conguration Files via SNMP
MIB Object OID Values Description
copyState .1.3.6.1.4.1.6027.3.5.1.1.1.1.11
1= running
2 = successful
3 = failed
Species the state of the copy
operation.
copyTimeStarted .1.3.6.1.4.1.6027.3.5.1.1.1.1.12 Time value Species the point in the up-
time clock that the copy
operation started.
copyTimeCompleted .1.3.6.1.4.1.6027.3.5.1.1.1.1.13 Time value Species the point in the up-
time clock that the copy
operation completed.
copyFailCause .1.3.6.1.4.1.6027.3.5.1.1.1.1.14
1 = bad lename
2 = copy in progress
3 = disk full
4 = le exists
5 = le not found
6 = timeout
7 = unknown
Species the reason the copy
request failed.
copyEntryRowStatus .1.3.6.1.4.1.6027.3.5.1.1.1.1.15 Row status Species the state of the copy
operation. Uses CreateAndGo
when you are performing the
copy. The state is set to active
when the copy is completed.
MIB Support to Display the Available Memory Size on Flash
Dell Networking provides more MIB objects to display the available memory size on ash memory. The following table lists the MIB
object that contains the available memory size on ash memory.
Table 61. MIB Objects for Displaying the Available Memory Size on Flash via SNMP
MIB Object OID Description
chStackUnitFlashUsageUtil 1.3.6.1.4.1.6027.3.19.1.2.8.1.6 Contains ash memory usage in
percentage.
The chStackUnitUtilTable MIB table contains the chStackUnitFlashUsageUtil MIB object which contains the ash memory usage
percent.
Viewing the Available Flash Memory Size
Simple Network Management Protocol (SNMP)
749