Administrator Guide
Figure 140. Case 2: Deployment Scenario of Conguring FC Flex IO Modules
Data Center Bridging (DCB)
Data center bridging (DCB) is supported on the FC Flex IO module installed in the MXL 10/40GbE Switch.
Ethernet Enhancements in Data Center Bridging
The following section describes DCB.
.
DCB refers to a set of IEEE Ethernet enhancements that provide data centers with a single, robust, converged network to support
multiple trac types, including local area network (LAN), server, and storage trac. Through network consolidation, DCB results in
reduced operational cost, simplied management, and easy scalability by avoiding the need to deploy separate application-specic
networks.
For example, instead of deploying an Ethernet network for LAN trac, include additional storage area networks (SANs) to ensure
lossless Fibre Channel trac, and a separate InniBand network for high-performance inter-processor computing within server
clusters, only one DCB-enabled network is required in a data center. The Dell Networking switches that support a unied fabric and
consolidate multiple network infrastructures use a single input/output (I/O) device called a converged network adapter (CNA).
A CNA is a computer input/output device that combines the functionality of a host bus adapter (HBA) with a network interface
controller (NIC). Multiple adapters on dierent devices for several trac types are no longer required.
Data center bridging satises the needs of the following types of data center trac in a unied fabric:
LAN
trac LAN trac consists of many ows that are insensitive to latency requirements, while certain applications,
such as streaming video, are more sensitive to latency. Ethernet functions as a best-eort network that may
drop packets in the case of network congestion. IP networks rely on transport protocols (for example, TCP)
for reliable data transmission with the associated cost of greater processing overhead and performance
impact.
Storage trac Storage trac based on Fibre Channel media uses the SCSI protocol for data transfer. This trac typically
consists of large data packets with a payload of 2K bytes that cannot recover from frame loss. To
successfully transport storage trac, data center Ethernet must provide no-drop service with lossless links.
InterProcess
Communication
(IPC) trac
InterProcess Communication (IPC) trac within high-performance computing clusters to share information.
Server trac is extremely sensitive to latency requirements.
898
FC Flex IO Modules