Administrator Guide
Command Output
To clear PFC TLV counters, use the clear pfc counters
interface port-type slot/port command.
show interface port-type slot/port pfc
statistics
Displays counters for the PFC frames received and transmitted
(by dot1p priority class) on an interface.
show interface port-type slot/port ets
{summary | detail}
Displays the ETS conguration applied to egress trac on an
interface, including priority groups with priorities and bandwidth
allocation.
To clear ETS TLV counters, enter the clear ets counters
interface port-type slot/port command.
Example of the show dot1p-queue mapping Command
Example of the show dcb Command
Example of the show interfaces pfc summary Command
Example of the show interface pfc statistics Command
Example of the show interface ets summary Command
Example of the show interface ets detail Command
Example of the show stack-unit all stack-ports all pfc details Command
Example of the show stack-unit all stack-ports all ets details Command
Example of the show interface DCBx detail Command
Dell(conf)# show dot1p-queue-mapping
Dot1p Priority: 0 1 2 3 4 5 6 7
Queue : 0 0 0 1 2 3 3 3
Dell# show dcb
stack-unit 0 port-set 0
DCB Status : Enabled
PFC Port Count : 56 (current), 56 (configured)
PFC Queue Count : 2 (current), 2 (configured)
Dell# show interfaces tengigabitethernet 0/49 pfc summary
Interface TenGigabitEthernet 0/49
Admin mode is on
Admin is enabled
Remote is enabled, Priority list is 4
Remote Willing Status is enabled
Local is enabled
Oper status is Recommended
PFC DCBx Oper status is Up
State Machine Type is Feature
TLV Tx Status is enabled
PFC Link Delay 45556 pause quantams
Application Priority TLV Parameters :
--------------------------------------
FCOE TLV Tx Status is disabled
ISCSI TLV Tx Status is disabled
Local FCOE PriorityMap is 0x8
Local ISCSI PriorityMap is 0x10
Remote FCOE PriorityMap is 0x8
Remote ISCSI PriorityMap is 0x8
916
FC Flex IO Modules