Administrator Guide

6 12% ETS
7 12% ETS
Remote Parameters:
-------------------
Remote is disabled
Local Parameters :
------------------
Local is enabled
TC-grp Priority# Bandwidth TSA
0 0,1,2,3,4,5,6,7 100% ETS
1 0% ETS
2 0% ETS
3 0% ETS
4 0% ETS
5 0% ETS
6 0% ETS
7 0% ETS
Priority# Bandwidth TSA
0 13% ETS
1 13% ETS
2 13% ETS
3 13% ETS
4 12% ETS
5 12% ETS
6 12% ETS
7 12% ETS
Oper status is init
Conf TLV Tx Status is disabled
Traffic Class TLV Tx Status is disabled
0 Input Conf TLV Pkts, 0 Output Conf TLV Pkts, 0 Error Conf TLV Pkts
0 Input Traffic Class TLV Pkts, 0 Output Traffic Class TLV Pkts, 0 Error Traffic Class TLV
Pkts
Table 80. show interface ets detail Command Description
Field Description
Interface Interface type with stack-unit and port number.
Max Supported TC Group Maximum number of priority groups supported.
Number of Trac Classes Number of 802.1p priorities currently congured.
Admin mode ETS mode: on or o.
When on, the scheduling and bandwidth allocation congured in
an ETS output policy or received in a DCBx TLV from a peer can
take eect on an interface.
Admin Parameters ETS conguration on local port, including priority groups,
assigned dot1p priorities, and bandwidth allocation.
Remote Parameters ETS conguration on remote peer port, including Admin mode
(enabled if a valid TLV was received or disabled), priority groups,
assigned dot1p priorities, and bandwidth allocation. If the ETS
Admin mode is enabled on the remote port for DCBx exchange,
the Willing bit received in ETS TLVs from the remote peer is
included.
Local Parameters ETS conguration on local port, including Admin mode (enabled
when a valid TLV is received from a peer), priority groups,
assigned dot1p priorities, and bandwidth allocation.
Operational status (local port) Port state for current operational ETS conguration:
• Init: Local ETS conguration parameters were exchanged
with peer.
920
FC Flex IO Modules