Administrator Guide

dot1p Value in
Incoming Frame
Queue Assignment
6 3
7 3
The following describes the dot1p-priority class group assignment
dot1p Value in
the Incoming
Frame
Priority Group Assignment
0 LAN
1 LAN
2 LAN
3 SAN
4 IPC
5 LAN
6 LAN
7 LAN
The following describes the priority group-bandwidth assignment.
Priority Group
Bandwidth Assignment
IPC 5%
SAN 50%
LAN 45%
PFC and ETS Conguration Command Examples
The following examples show PFC and ETS conguration commands to manage your data center trac.
Example of Conguring QoS Priority-Queue Assignment to Honor Dot1p Priorities
Example of Conguring a DCB Input Policy to Apply PFC to Lossless SAN Priority Trac
Example of Conguring an ETS Priority Group
Example of Conguring an ETS Output Policy for Egress Trac
Example of Conguring a DCB Output Policy to Apply ETS (Bandwidth Allocation and Scheduling) to IPC, SAN, and LAN
Priority Trac
Example of Applying DCB Input and Output Policies to an Interface
Example of Conguring a QoS Output Policy to Specify Bandwidth Allocation to Dierent Trac Types if DCBx Version is CIN
Example of Creating a QoS Policy Map for DCBx CIN Bandwidth Allocation
Example of Applying the QoS Policy Map for DCBx CIN Bandwidth Allocation to an Interface
Dell(conf)# service-class dynamic dot1p
Or
Dell(conf)# interface tengigabitethernet 0/1
Dell(conf-if-te-0/1)# service-class dynamic dot1p
FC Flex IO Modules
925