Manualshelf

Administrator Guide

ManualsBrandsDell ManualsserversDell Force10 MXL Blade
919293949596979899100
To display the number of FP blocks that is allocated for the dierent VLAN services, you can use the show cam-acl-vlan
command. After CAM conguration for ACL VLAN groups is performed, reboot the system to enable the settings to be stored in
nonvolatile storage. During the initialization of CAM, the chassis manager reads the NVRAM and allocates the dynamic VCAP
regions.
Access Control List (ACL) VLAN Groups and Content Addressable Memory (CAM)
93