Reference Guide

IPv4 Routing | 309
Related
Commands
show ip cam stack-unit
Display content-addressable memory (CAM) entries.
Syntax
show ip cam stack-unit 0-5 port-set pipe-number [ip-address mask [longer-prefixes] | detail |
member-info | summary]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Flags Classifies the entry as one of the following:
• perm - the entry was manually configured and will not time out
• temp - the entry was learned and will time out after 72 hours of inactivity.
Also included in the flag is an indication of the validity of the route:
• ok - the entry is valid.
• ex - the entry expired.
• ?? - the entry is suspect.
TTL Displays the amount of time until the entry ages out of the cache. For dynamically
learnt entries only.
Type Displays IP as the type of entry.
Address Displays the IP address(es) assigned to the host.
Table 15-4. show hosts Command Example Fields (continued)
Field Description
traceroute Views the DNS resolution
ip host Configures a host.
0-5
Enter the stack-unit ID, from 0 to 5.
pipe-number
Enter the number of the Port-Pipe number.
Range: 0 to 0
ip-address mask
[
longer-prefix]
(OPTIONAL) Enter the IP address and mask of a route to CAM entries for that route
only.
Enter the keyword
longer-prefixes to view routes with a common prefix.
detail Enter the keyword detail to display the group index ID used by the ecmp routes in
the CAM.
member-info Enter the keyword member-info to display the group index used by the ecmp, the
number of egress ports (members) for the ecmp, and the port details of each member.
The detail information under
member-info will give the MAC address, VLAN
ID and gateway of every member port of the ecmp.
summary (OPTIONAL) Enter the keyword summary to view a table listing route prefixes and
the total number routes which can be entered in to CAM.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module