Specifications

A Principled Technologies test report 39
The datacenter in a box performance test: Comparing Dell and HP
blade solutions
Dell EqualLogic PS-M4110 solution
HP D2200sb + VSA solution
6. Enter an appropriate hostname, select Use the
following IP address, enter the appropriate
network information, and select OK.
7. Press Enter to confirm when the dialog box pops
up.
8. Press Enter to close the pop-up showing that the
network was successfully configured.
9. Select Back, and then select Log Out.
Installing HP DSM for MPIO
1. Double-click the installer.
2. At the welcome screen, click Next.
3. At the End User License Agreement screen, accept,
and click Next.
4. At the Choose Destination Location screen, leave
the default location, and click Next.
5. At the Ready to Install the Program screen, click
Install.
6. When prompted, leave the Yes, I want to restart
my computer now option selected, and click Finish
to reboot the server.
Creating a new management group and building a new
virtual SAN
1. Click StartAll ProgramsHPP4000HP P4000
Centralized Management Console
2. At the Find Systems screen that pops up, click
Add…
3. Enter the IP address of the first VSA node, and
click OK.
4. Click Add…
5. Enter the IP address of the second VSA node, and
click OK.
6. Click Add…
7. Enter the IP address of the FOM, and click OK.
8. Click Close.
9. In the left pane of the CMC, click Getting Started.
10. In the right pane, click Management Groups,
Clusters, and Volumes Wizard.
11. At the Welcome screen, click Next.