Specifications

A Principled Technologies test report 41
The datacenter in a box performance test: Comparing Dell and HP
blade solutions
Dell EqualLogic PS-M4110 solution
HP D2200sb + VSA solution
3. At the iSCSI Initiator Properties screen, click the
Configuration tab, and highlight and copy the IQN
initiator name.
4. Click StartAll ProgramsHPP4000HP P4000
Centralized Management Console.
5. At the left pane, click the name of your
management group.
6. At the right pane, click Log in to view, enter the
appropriate credentials, and click Log In.
7. At the left pane, expand the management
groupcluster nameVolumes and Snapshots,
and click on the new volume.
8. At the right pane, click Server Tasks, and then click
New Server…
9. Enter the appropriate name, IP address, and paste
in the IQN initiator name under Initiator Node
Name, then click OK.
10. Once you have added the server it will
automatically go to the the Volumes and
Snapshots tab of the newly added server. Click
Tasks, and then click Assign and Unassign Volumes
and Snapshots…
11. Select the appropriate volume, and check the
Assigned checkbox, and click OK.
Adding the target volume in iSCSI initiator
1. Click Start Administrative ToolsiSCSI Initiator.
2. Select the Discovery Tab, and click Discover Portal.
3. Enter the virtual IP address for the HP VSA group,
and click OK.
4. Select the Targets tab, and click Refresh.
5. Select the appropriate Inactive Target listed, and
click Connect.
6. Ensure that Add this connection to the list of
Favorite Targets is selected, check the Enable
multi-path check box, and click OK.