Command Line Reference Guide

1212 | Quality of Service (QoS)
www.dell.com | support.dell.com
Example
Figure 48-6. show cam layer3-qos linecard port-set Command Output
Example
Figure 48-7. show cam layer3-qos linecard interface Command without Trust Output
Example
Figure 48-8. show cam layer3-qos summary Command Output
show qos class-map
c e s
View the current class map information.
Syntax
show qos class-map [class-name]
Parameters
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
History
Force10#show cam layer3-qos linecard 13 port-set 0
Cam Port Dscp Proto Tcp Src Dst SrcIp DstIp DSCP Queue
Index Flag Port Port Marking
----------------------------------------------------------------------------------------
24511 1 0 TCP 0x5 2 5 1.0.0.1/24 2.0.0.2/24 - TRUST-DSCP
24512 1 0 UDP 0x2 2 5 8.0.0.8/24 8.0.0.8/24 23 3
Force10#
Force10#sh cam layer3-qos interface gigabitethernet 2/1
Cam Port Dscp Proto Tcp Src Dst SrcIp DstIp DSCP Queue
Index Flag Port Port Marking
-----------------------------------------------------------------------------------------
-------
23488 1 56 0 0x0 0 0 0.0.0.0/0 0.0.0.0/0 - 7
23489 1 48 0 0x0 0 0 0.0.0.0/0 0.0.0.0/0 - 6
23490 1 40 0 0x0 0 0 0.0.0.0/0 0.0.0.0/0 - 5
23491 1 0 IP 0x0 0 0 10.1.1.1/32 20.1.1.1/32 - 0
23492 1 0 IP 0x0 0 0 10.1.1.1/32 20.1.1.2/32 - 0
24511 1 0 0 0x0 0 0 0.0.0.0/0 0.0.0.0/0 - 0
Force10#
Force10#show cam layer3-qos linecard 13 port-set 0 summary
Total number of CAM entries for Port-Set 0 is 100
Force10#
class-name
(Optional) Enter the name of a configured class map.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.1.1.1 Introduced on E-Series