Command Line Reference Guide

Quality of Service (QoS) | 1217
Example
Figure 48-17. show qos qos-policy-output Command Output
show qos statistics
c e s
View QoS statistics.
Syntax
show qos statistics {wred-profile [interface]} | [interface]
Parameters
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
History
Force10#show qos qos-policy-output
Qos-policy-output qosOut
Rate-limit 50 50 peak 50 50
Wred yellow 1
Wred green 1
wred-profile interface
Platform—E-Series Only
: Enter the keyword wred-profile and
optionally one of the following keywords and slot/port or number
information:
• For a Fast Ethernet interface, enter the keyword
FastEthernet
followed by the slot/port information.
• For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For a SONET interface, enter the keyword
sonet followed by the slot/
port information.
• For a Ten Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
interface
Enter one of the following keywords and slot/port or number information:
• On the C-Series and E-Series, For a Fast Ethernet interface, enter the
keyword
FastEthernet followed by the slot/port information.
• For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For a SONET interface, enter the keyword
sonet followed by the slot/
port information.
• For a Ten Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
Version 7.7.1.1 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.1.1.1 Introduced on E-Series