Command Line Reference Guide

140 | Control and Monitoring
www.dell.com | support.dell.com
Defaults
None
Command Mode
EXEC
EXEC Privilege
Command
History
S-Series Example
Figure 5-53. Command Example: show software ifm clients summary on S-Series
ifcb interface
Enter the keyword ifcb followed by one of the following interface IDs followed by the
slot/port information to display interface control block information for that interface:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet.
• For a Port Channel interface, enter the keyword
port-channel followed by a
number:
C-Series and S-Series Range: 1-128
E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to 512 for
ExaScale.
• For a 10G Ethernet interface, enter the keyword
TenGigabitEthernet.
C-Series options also include:
• fastethernet for a Fast Ethernet interface
•
loopback for a Loopback interface
•
managementethernet for a Management Ethernet interface
•
null for a Null interface
•
vlan for a VLAN interface (Range: 1 to 4094, 1 to 2094 for ExaScale)
stack-unit
unit-ID
Enter the keyword stack-unit followed by the stack member number to display IFM
information for that unit.
Range: 0 to 1
Note: This option is only available on S-Series.
trace-flags
Enter the keyword trace-flags to display IFM information for internal trace flags.
Version 7.6.1.0 Introduced for C-Series and S-Series
Force10#show software ifm clients summary
ClntType Inst svcMask subSvcMask tlvSvcMask tlvSubSvc swp
IPM 0 0x00000000 0x00000000 0x90ff71f3 0x021e0e81 31
RTM 0 0x00000000 0x00000000 0x800010ff 0x01930000 43
VRRP 0 0x00000000 0x00000000 0x803330f3 0x00400000 39
L2PM 0 0x00000000 0x00000000 0x87ff79ff 0x0e032200 45
ACL 0 0x00000000 0x00000000 0x867f50c3 0x000f0218 44
OSPF 0 0x00000dfa 0x00400098 0x00000000 0x00000000 0
PIM 0 0x000000f3 0x00030000 0x00000000 0x00000000 0
IGMP 0 0x000e027f 0x00000000 0x00000000 0x00000000 0
SNMP 0 0x00000000 0x00000000 0x800302c0 0x00000002 30
EVTTERM 0 0x00000000 0x00000000 0x800002c0 0x00000000 29
MRTM 0 0x00000000 0x00000200 0x81f7103f 0x00000000 38
DSM 0 0x00000000 0x00000000 0x80771003 0x00000000 32
LACP 0 0x00000000 0x00000000 0x8000383f 0x00000000 35
DHCP 0 0x00000000 0x00000000 0x800000c2 0x0000c000 37
V6RAD 0 0x00000433 0x00030000 0x00000000 0x00000000 0
Unidentified Client0 0x006e0002 0x00000000 0x00000000 0x00000000 0
Force10#