Command Line Reference Guide

E-Series ExaScale Debugging and Diagnostics | 1537

E-Series ExaScale Debugging and Diagnostics

Overview

This document is for E-Series ExaScale E1200i and the E600i only and support begins with FTOS

versions 8.1.1.0 and 8.1.1.2 respectively as denoted by the platform symbol e

FTOS supports an extensive suite of protocol-specific debug commands for packet- and event-level

debugging. These commands are described throughout this document. In addition, FTOS supports

commands for diagnosing suspected hardware issues.

This chapter contains the following sections:

• Diagnostics and Monitoring Commands

• Offline Diagnostic Commands (not supported in FTOS version 8.1.1.0)

• Hardware Commands

Diagnostics and Monitoring Commands

The diagnostics and monitoring commands are:

• dataplane-diag disable loopback

• dataplane-diag disable dfo-reporting

• diag sfm

• ip control-plane egress-filter-traffic

• logging coredump kernel disable

• logging coredump kernel server

• logging coredump linecard

• power-off/on sfm

• reset sfm

• show command-history

• show console

• show diag sfm

• show processes ipc

• show processes ipc flow-control

• show revision

• show tech-support