Command Line Reference Guide

1542 | E-Series ExaScale Debugging and Diagnostics
www.dell.com | support.dell.com
logging coredump kernel server
e
x
Designate the logging core-dump files to be saved to a remote server rather than flash.
Syntax
logging coredump kernel server
To save the logging core-dump files to flash (the default), use the no logging coredump kernel
server command.
Defaults
Saved on flash
Command Modes
CONFIGURATION
Command
History
Related
Commands
logging coredump linecard
e
x
Enable line card core-dump logging on a specific line card or on all line cards.
Syntax
logging coredump linecard {slot_number [port-shutdown | no-port-shutdown] | all}
To disable line card coredump logging, use the no logging coredump linecard [slot_number |
all] command.
Parameters
Defaults
Disabled (core-dump logging is off)
Command Modes
CONFIGURATION
Command
History
Usage
Information
The line card core-dump is stored on flash in a directory:
• Storage Directory Name: flash:CORE_DUMP_DIR
— Line Card core-dump naming convention is: f10lpSlot_Number.core.gz
Version 8.1.1.2 Introduced on E-Series ExaScale E600i
Version 8.1.1.0 Introduced on E-Series ExaScale E1200i
logging coredump linecard Enable core-dump logging on line cards
logging coredump kernel disable Disable kernel core-dump logging
linecard slot number Enter the keyword linecard followed by the slot number to enable core-dump
logging line card details.
Range: 0 to 13 on the E1200; 0 on 6 for E600/E600i, and 0 to 5 on the E300.
port-shutdown Enter the keyword port-shutdown to configure the system to shutdown the
physical interfaces during a software exception and the subsequent core dump.
no-port-shutdown Enter the keyword no-port-shutdown to configure the system so that the
physical interfaces remain up during a software exception and the subsequent
core dump. This is an “undo” feature for the
port-shutdown option.
linecard all Enter the keyword linecard all to enable core-dump logging details on all line
cards.
Version 8.1.1.2 Introduced on E-Series ExaScale E600i
Version 8.1.1.0 Introduced on E-Series ExaScale E1200i