Command Line Reference Guide

Control and Monitoring | 155
Example
Figure 5-61. Command Example: traceroute (IPv4)
Figure 5-62 contains examples of the IPv6 traceroute command with both a compressed IPv6 address
and uncompressed address.
Example
Figure 5-62. Command Example: traceroute (IPv6)
Related
Commands
Force10#traceroute www.force10networks.com
Translating "www.force10networks.com"...domain server (10.11.0.1) [OK]
Type Ctrl-C to abort.
------------------------------------------------------------------------------------------
Tracing the route to www.force10networks.com (10.11.84.18), 30 hops max, 40 byte packets
------------------------------------------------------------------------------------------
TTL Hostname Probe1 Probe2 Probe3
1 10.11.199.190 001.000 ms 001.000 ms 002.000 ms
2 gwegress-sjc-02.force10networks.com (10.11.30.126) 005.000 ms 001.000 ms 001.000 ms
3 fw-sjc-01.force10networks.com (10.11.127.254) 000.000 ms 000.000 ms 000.000 ms
4 www.force10networks.com (10.11.84.18) 000.000 ms 000.000 ms 000.000 ms
Force10#
Force10#traceroute 100::1
Type Ctrl-C to abort.
-----------------------------------------------------------
Tracing the route to 100::1, 64 hops max, 60 byte packets
-----------------------------------------------------------
Hops Hostname Probe1 Probe2 Probe3
1 100::1 000.000 ms 000.000 ms 000.000 ms
Force10#traceroute 3ffe:501:ffff:100:201:e8ff:fe00:4c8b
Type Ctrl-C to abort.
-----------------------------------------------------------------------------------------
Tracing the route to 3ffe:501:ffff:100:201:e8ff:fe00:4c8b, 64 hops max, 60 byte packets
-----------------------------------------------------------------------------------------
Hops Hostname Probe1 Probe2 Probe3
1 3ffe:501:ffff:100:201:e8ff:fe00:4c8b
000.000 ms 000.000 ms 000.000 ms
Force10#
ping Test connectivity to a device.