Command Line Reference Guide

1558 | E-Series ExaScale Debugging and Diagnostics
www.dell.com | support.dell.com
Hardware Commands
These commands display information from a hardware sub-component or ASIC.
The commands are:
• clear hardware btm
• clear hardware rpm mac counters
• hardware monitor linecard
• hardware monitor mac
• hardware watchdog
• show control-traffic
• show control-traffic ingress | egress
• show control-traffic linecard
• show control-traffic rpm-switch
• show cpu-interface-stats
• show hardware btm
• show hardware fpc forward
• show hardware fpc lookup detail
• show hardware rpm mac counters
• show interfaces link-status
• show interfaces phy
• show interfaces transceiver
• show ipc-traffic
• show ipc-traffic ingress | egress
• show ipc-traffic linecard
• show ipc-traffic rpm-switch
• show logging driverlog
clear hardware btm
e
x
Clear the Buffer Traffic Manager (BTM) error counters and status registers.
Syntax
clear hardware {rpm | linecard} number port-set pipe-number btm {egress | ingress | all} {errors |
status}
Warning: These commands should be used only when you are working directly with
Dell Force10 TAC (Technical Assistance Center) while troubleshooting a problem. Do
not use these command without the assistance of a Dell Force10 TAC representative.
To contact Dell Force10 TAC for assistance:
E-mail Direct Support: [e-mail]
Web: www.force10networks.com/support/
Telephone support:
US and Canada customers: 866-965-5800
International customers: 408-965-5800