Command Line Reference Guide

E-Series ExaScale Debugging and Diagnostics | 1559
Parameters
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Related
Commands
clear hardware rpm mac counters
e
x
Clear the MAC counters for the party-bus control switch on the IPC subsystem of the RPM.
Syntax
clear hardware rpm slot-number mac counters
Parameters
Defaults
No default behavior or values
Command Mode
EXEC
EXEC Privilege
rpm Enter the keyword rpm to clear BTM error counters or status registers on
the RPM.
linecard number
Enter the keyword
linecard followed by the line card slot number to clear
BTM error counters or status registers on the specified line card.
Range: 0 to 13 on a E1200, 0 to 6 on a E600/E600i, and 0 to 5 on an E300
port-set pipe-number
Enter the keyword
port-set followed by the number of the line card or
RPM’s Port-Pipe.
Range: 0 to 1
egress errors | status
(OPTIONAL) Enter the keywords
egress errors or egress status to
clear egress BTM error counters or ingress BTM status registers.
ingress errors | status
(OPTIONAL) Enter the keywords ingress errors or ingress status
to clear ingress BTM error counters or ingress BTM status registers.
all errors | status
(OPTIONAL) Enter the keywords
all errors or all status to clear both
egress and ingress BTM error counters and status registers.
Version 8.1.1.2 Introduced on E-Series ExaScale E600i
Version 8.1.1.0 Introduced on E-Series ExaScale E1200i
Force10#clear hardware linecard 2 port-set 0 btm ingress errors
Force10#clear hardware rpm 1 port-set 0 btm ingress errors
Force10#clear hardware rpm 0 port-set 0 btm ingress errors
% Error: RPM 0 is not active.
Force10#
show hardware btm Display the BTM counters
slot-number
Enter the RPM slot number.
Range: 0 -1