Command Line Reference Guide

1560 | E-Series ExaScale Debugging and Diagnostics
www.dell.com | support.dell.com
Command
History
hardware monitor linecard
e
x
Configure the system to take an action upon a line card hardware error.
Syntax
hardware monitor linecard asic {btm | fpc} action-on-error {card-problem | card-reset |
card-shutdown}
Parameters
Defaults
None
Command Mode
CONFIGURATION
Command
History
hardware monitor mac
e
x
Configure the system to shut down all ports on a line card upon a MAC hardware error.
Syntax
hardware monitor mac action-on-error port-shutdown
Defaults
None
Command Mode
CONFIGURATION
Command
History
hardware watchdog
e
x
Set the watchdog timer to trigger a reboot and restart the system.
Syntax
hardware watchdog
Version 8.1.1.2 Introduced on E-Series ExaScale E600i
Version 8.1.1.0 Introduced on E-Series ExaScale E1200i
btm Enter the keyword btm to configure the system to take an action upon a Buffer
Traffic Manager hardware error.
fpc Enter the keyword fpc to configure the system to take an action upon a Flexible
Packet Classifier hardware error.
card-problem Enter the keyword card-problem to place a line card in a card-problem state
upon a hardware error.
card-reset Enter the keyword card-reset to reset a line card upon a hardware error.
card-shutdown Enter the keyword card-shutdown to shutdown a line card upon a hardware
error.
Version 8.1.1.2 Introduced on E-Series ExaScale E600i
Version 8.1.1.0 Introduced on E-Series ExaScale E1200i
Version 8.1.1.2 Introduced on E-Series ExaScale E600i
Version 8.1.1.0 Introduced on E-Series ExaScale E1200i