Command Line Reference Guide

E-Series ExaScale Debugging and Diagnostics | 1561
Defaults
Disabled
Command Mode
CONFIGURATION
Command
History
show control-traffic
e
x
Show information related to CP, RP1 or RP2, and ACL-FPGA related control traffic.
Syntax
show control-traffic rpm [0-1] {cp | rp1 | rp2 | acl-fpga} {counters | statistics}
Parameters
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
History
show control-traffic ingress | egress
e
x
Display information related to packet drops and counters for ingress or egress IPC traffic.
Syntax
show control-traffic rpm [0-1] {ingress| egress} {counters | drops}
Parameters
Defaults
No default behavior or values
Version 8.1.1.2 Introduced on E-Series ExaScale E600i
Version 8.1.1.0 Introduced on E-Series ExaScale E1200i
cp
Enter the keyword
cp to view IPC information on the CPs counters or
statistics.
rp1
Enter the keyword rp1 to display the RP1's control counters or statistics
rp2
Enter the keyword
rp2 to display the RP2’s control counters or statistics.
acl-fpga
Enter the keyword
acl-fpga to display the counters for packets
transmitted through acl-fpga.
Version 8.1.1.2 Introduced on E-Series ExaScale E600i
Version 8.1.1.0 Introduced on E-Series ExaScale E1200i
ingress
Enter the keyword
ingress to view control information on the ingress
(LC-to-RPM) path.
egress
Enter the keyword egress to view control information on the egress
(RPM-to-LC) path.
counters
(OPTIONAL) Enter the keyword counters to display the control
counters.
drops
(OPTIONAL) Enter the keyword drops to display control drop-related
error counters.