Command Line Reference Guide

1562 | E-Series ExaScale Debugging and Diagnostics
www.dell.com | support.dell.com
Command Modes
EXEC
EXEC Privilege
Command
History
show control-traffic linecard
e
x
Display information relating to packet counts for the selected line card’s control traffic.
Syntax
show control-traffic rpm [0-1] linecard # {lc-switch counters | lc-port counters}
Parameters
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
History
show control-traffic rpm-switch
e
x
Display information relating to packet counts for the RPM Switch’s control traffic.
Syntax
show control-traffic rpm [0-1] rpm-switch {counters | configuration | qos-counters |
qos-configuration | cp-port | rp1-port | rp2-port | lc-switch # | Peer-RPM} {counters | configuration |
qos-counters | qos-configuration}
Parameters
Version 8.1.1.2 Introduced on E-Series ExaScale E600i
Version 8.1.1.0 Introduced on E-Series ExaScale E1200i
linecard Enter the keyword linecard <0-to display the RPM Switch’s control
related information.
counters (OPTIONAL) Enter the keyword counters to display the control
counters.
lc-switch (OPTIONAL) Enter the keyword lc-switch to display the counter
information for the LC-Switch.
lc-port (OPTIONAL) Enter the keyword lc-port to display information for the
LC-port.
Version 8.1.1.2 Introduced on E-Series ExaScale E600i
Version 8.1.1.0 Introduced on E-Series ExaScale E1200i
rpm-switch Enter the keyword rpm-switch to display the RPM Switch’s control
related information.
counters (OPTIONAL) Enter the keyword counters to display the control
counters.
drops (OPTIONAL) Enter the keyword drops to display control drop-related
error counters.
configuration (OPTIONAL) Enter the keyword configuration to display the
RP-Switch related control configuration.