Command Line Reference Guide

E-Series ExaScale Debugging and Diagnostics | 1563
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
History
show cpu-interface-stats
e
x
The command provides an immediate snapshot of the health of the internal RPM and line card CPU.
Generally this command is used in concert with Dell Force10 Technical Support engineers.
Syntax
show cpu-interface-stats {cp | lp | rp1 | rp2}
Parameters
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
History
qos-counters (OPTIONAL) Enter the keyword qos-counters to display the
RP-Switch qos-counters.
qos-configuration (OPTIONAL) Enter the keyword qos-configuration to display the
RP-Switch qos-configuration.
cp-port (OPTIONAL) Enter the keyword cp-port to display the RP-Switch
information for the CP port.
rp1-port (OPTIONAL) Enter the keyword rp1-port to display the RP-Switch
information for the RP1 port.
rp2-port (OPTIONAL) Enter the keyword rp2-port to display the RP-Switch
information for the CRP2 port.
lc-switch (OPTIONAL) Enter the keyword lc-switch to display the counter
information for the LC-Switch.
peer-rpm (OPTIONAL) Enter the keyword peer-rpm to display information for
the peer RPM.
Version 8.1.1.2 Introduced on E-Series ExaScale E600i
Version 8.1.1.0 Introduced on E-Series ExaScale E1200i
cp
Enter the keyword
cp to display the CP's interface statistics.
lp
Enter the keyword
lp to display the LP's interface statistics
rp1
Enter the keyword
rp1 to display the RP1's interface statistics
rp2
Enter the keyword
rp2 to display the RP2’s interface statistics.
Version 8.1.1.2 Introduced on E-Series ExaScale E600i
Version 8.1.1.0 Introduced on E-Series ExaScale E1200i