Command Line Reference Guide

E-Series ExaScale Debugging and Diagnostics | 1567
show hardware fpc forward
e
x
Display receive and transmit counters, error counters and status registers for the forwarding functional
area of the FPC (flexible packet classification engine).
Syntax
show hardware linecard number port-set pipe-number fpc forward {counters | drops | spi
{err-counters | spichannel# counters} | status}
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Command
History
linecard
number Enter the keyword linecard followed by the line card slot number.
Range: 0 to 13 on E1200, 0 to 6 on E600/E600i, and 0 to 5 on E300
port-set
pipe-number Enter the keyword port-set followed by the number of the line card’s
Port-Pipe.
Range: 0 to 1
counters
(OPTIONAL) Enter the keyword
counters to display the FPC receive and
transmit packet, byte counters, and error counters.
drops
(OPTIONAL) Enter the keyword drops to display FPC drop-related error
counters.
spi err-counters
(OPTIONAL) Enter the keywords
spi err-counters to display the FPC
System Packet Interface (SPI) receive and transmit packet, byte counters, error
counters, and key status registers on the ingress and egress paths.
spi spichannel# counters
(OPTIONAL) Enter the keywords
spi spichannel# counters to display
the FPC System Packet Interface level 4 (SPI4) counters.
status
(OPTIONAL) Enter the keywords status to display FPC status registers.
Version 8.1.1.2 Introduced on E-Series ExaScale E600i
Version 8.1.1.0 Introduced on E-Series ExaScale E1200i