Command Line Reference Guide

1572 | E-Series ExaScale Debugging and Diagnostics
www.dell.com | support.dell.com
Example
Figure 66-20. show hardware rpm command Examples
Related
Commands
show hardware rpm mac counters
e
x
Display receive- and transmit-counters for the party-bus control switch on the IPC subsystem of the
RPM.
Syntax
show hardware rpm slot-number mac counters [port port-number]
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Force10#show hardware rpm 0 cp data-plane counters
Input statistics
31262 Bytes, 319 Frames,
31262 Total Bytes, 319 Total Frames,
0 Broadcasts, 0 Multicasts,
0 CRC, 0 Oversize,
0 Fragments, 0 Jabber,
0 64-byte Frames, 638 127-byte Frames,
0 255-byte Frames, 0 511-byte Frames,
0 1023-byte Frames, 0 Max Frames,
0 Error, 0 Dropped,
0 Undersized
Output statistics
31262 Bytes, 319 Frames, 357822480 Total Bytes,
0 Collisions, 0 Late collisions,
0 Broadcasts, 0 Multicasts
Force10#show hardware rpm 0 cp data-plane statistics
Input statistics
640 Interrupts, 0 Ticks,
0 DMA Errors, 0 Stopped,
0 Cleanup, 0 Throttle Drops,
0 Status Error, 0 Too Large,
0 Buff Err0, 320 Receive Interrupts,
320 Readied for Protocols, 0 Jumbo,
0 Jumbo Error, 0 Ignored,
0 Jumbo Missing first, 0 Jumbo Dup First,
0 Jumbo Mget Failed,
0 Jumbo ClGet Failed, 0 No Mem,
0 Overflow fix count,
0 Mget Failed, 0 ClGet Failed
Output statistics
0 Pause, 0 Watchdog,
0 Late Collision, 0 Underrun,
0 Retransmit Limit, 0 Out Frames,
0 No Mem, 0 Phy Syncs
Force10#
show hardware fpc forward Display information related to FPC forward.
slot-number
Enter the RPM slot number 0 or 1.
port port-number (OPTIONAL) Enter the keyword port followed by the port number of the
parity-bus control switch.
Range: 0 to 24