Command Line Reference Guide

E-Series ExaScale Debugging and Diagnostics | 1573
Command
History
Example
Figure 66-21. show hardware rpm mac counters Command Example
show interfaces link-status
e
x
Displays 10-Gigabit Ethernet link fault signaling and port status information.
Syntax
show interfaces tenGigabitEthernet slot/port link-status
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Version 8.1.1.2 Introduced on E-Series ExaScale E600i
Version 8.1.1.0 Introduced on E-Series ExaScale E1200i
Table 66-2. show hardware rpm mac counters Command Example Information
Slot ID # Port number on the party-bus control switch.
RX Frames Number of packets received by the party-bus switch from the processor in the specified slot.
TX Frames Number of packets sent by the party-bus switch to the processor in the specified slot.
Force10#show hardware rpm 0 mac counters
PORT# RX Frames TX Frames
--------------------------------------
0 [LC0 ] 0 5
1 [LC1 ] 25171 2119
2 [LC2 ] 13967 2108
3 [LC3 ] 13964 2108
4 [LC4 ] 0 5
5 [LC5 ] 25134 2108
6 [LC6 ] 0 5
7 [LC7 ] 0 5
8 [LC8 ] 0 5
9 [LC9 ] 0 5
10 [LC10 ] 0 5
11 [LC11 ] 0 5
12 [LC12 ] 0 5
13 [LC13 ] 0 5
20 [LOC-CP ] 23232 101339
21 [LOC-RP1] 5248 1097
22 [LOC-RP2] 5250 1104
23 [UNUSED ] 0 0
24 [REM-RPM] 12617 12630
Force10#
tenGigabitEthernet Enter the keyword tenGigabitEthernet followed by the slot/port
information.
Version 8.1.1.2 Introduced on E-Series ExaScale E600i
Version 8.1.1.0 Introduced on E-Series ExaScale E1200i