Command Line Reference Guide

E-Series ExaScale Debugging and Diagnostics | 1577
Example
Figure 66-24. show interfaces gigabitethernet transceiver Command Example
show ipc-traffic
e
x
Show information related to CP, RP1 or RP2 related IPC traffic.
Syntax
show IPc-traffic rpm [0-1] {cp | rp1 | rp2} {counters | statistics}
Parameters
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
History
show ipc-traffic ingress | egress
e
x
Display information related to packet drops and counters for ingress or egress IPC traffic.
Syntax
show ipc-traffic rpm [0-1] {ingress| egress} {counters | drops}
Force10#show interfaces gigabitethernet 1/0 transceiver
SFP is present.
SFP 0 Serial Base ID fields
SFP 0 Id = 0x03
SFP 0 Ext Id = 0x04
SFP 0 Connector = 0x07
SFP 0 Transciever Code = 0x00 0x00 0x00 0x01 0x20 0x40 0x0c 0x05
SFP 0 Encoding = 0x01
SFP 0 BR Nominal = 0x15
SFP 0 Length(9um) Km = 0x00
SFP 0 Length(9um) 100m = 0x00
SFP 0 Length(50um) 10m = 0x1e
SFP 0 Length(62.5um) 10m = 0x0f
SFP 0 Length(Copper) 10m = 0x00
SFP 0 Vendor Name = FINISAR CORP.
SFP 0 Vendor OUI = 0x00 0x90 0x65
SFP 0 Vendor PN = FTRJ8519P1BNL
SFP 0 Vendor Rev = A
SFP 0 Laser Wavelength = 850 nm
SFP 0 CheckCodeBase = 0x66
SFP 0 Serial Extended ID fields
SFP 0 Options= 0x00 0x12
SFP 0 BR max= 0
SFP 0 BR min= 0
SFP 0 Vendor SN= P5N1ACE
SFP 0 Datecode = 040528
SFP 0 CheckCodeExt = 0x5b
Force10#
cp
Enter the keyword
cp to view IPC information on the CPs counters or
statistics.
rp1
Enter the keyword rp1 to display the RP1's IPC counters or statistics
rp2
Enter the keyword
rp2 to display the RP2’s IPC counters or statistics.
Version 8.1.1.2 Introduced on E-Series ExaScale E600i
Version 8.1.1.0 Introduced on E-Series ExaScale E1200i