Command Line Reference Guide

1578 | E-Series ExaScale Debugging and Diagnostics
www.dell.com | support.dell.com
Parameters
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
History
show ipc-traffic linecard
e
x
Display information relating to packet counts for the selected line card’s IPC traffic.
Syntax
show ipc-traffic rpm [0-1] linecard # {lc-cpu counters | lc-switch counters}
Parameters
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
History
show ipc-traffic rpm-switch
e
x
Display information relating to packet counts for the RPM Switch’s IPC traffic.
Syntax
show ipc-traffic rpm [0-1] rpm-switch {counters | configuration | qos-counters | qos-configuration
| cp-port | rp1-port | rp2-port | lc-switch # | Peer-RPM} {counters | configuration | qos-counters |
qos-configuration}
ingress
Enter the keyword
ingress to view IPC information on the ingress
(LC-to-RPM) path.
egress
Enter the keyword egress to view IPC information on the egress
(RPM-to-LC) path.
counters
(OPTIONAL) Enter the keyword counters to display the IPC counters.
drops
(OPTIONAL) Enter the keyword
drops to display IPC drop-related error
counters.
Version 8.1.1.2 Introduced on E-Series ExaScale E600i
Version 8.1.1.0 Introduced on E-Series ExaScale E1200i
linecard Enter the keyword linecard <0-to display the RPM Switch’s IPC related
information.
counters (OPTIONAL) Enter the keyword counters to display the IPC counters.
lc-cpu (OPTIONAL) Enter the keyword lc-port to display information for the
LC-CPU.
lc-switch (OPTIONAL) Enter the keyword lc-switch to display the counter
information for the LC-Switch.
Version 8.1.1.2 Introduced on E-Series ExaScale E600i
Version 8.1.1.0 Introduced on E-Series ExaScale E1200i