Command Line Reference Guide

Content Addressable Memory (CAM) for ExaScale | 425
microcode
e
x
Assign the microcode to the created CAM-profile template
Syntax
microcode {default | ipv6-switched | lag-hash-align | vrf}
Parameters
Defaults
None
Command Modes
CONFIGURATION-CAM-profile-template
Command
History
Usage
Information
You must assign a microcode to a CAM-profile template.
IPv6 is not supported with VRF microcode on ExaScale.
default
Distributes CAM space for a typical deployment.
• Applies to the Default CAM-profile and the recommended CAM-profile
templates.
• Recommended for any user-defined CAM-profiles.
vrf Distributes space to best manage IPv4 and IPv6 VRF packet forwarding
• Applies to the VRF CAm-profile tEmplate only.
lag-hash-align
ipv6-switched
Version 8.2.1.0 Introduced on E-Series ExaScale