Administrator Guide

ip-address (OPTIONAL) Enter the IP address in dotted decimal format of
the RPF neighbor.
distance (OPTIONAL) Enter a number as the distance metric assigned
to the mroute. The range is from 0 to 255.
Defaults Not configured.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
E-Series legacy
command
Related
Commands
show ip mroute — displays the routing table.
ip multicast-limit
To limit the number of multicast entries on the system, use this feature.
Z9000
Syntax
ip multicast-limit limit
Parameters
limit Enter the desired maximum number of multicast entries on
the system. The S-Series range is from 1 to 16000.
Defaults The S-Series default is 4000.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.0.2.0 Introduced on the S6000.
1064
Multicast