Administrator Guide

Example
(Address)
Dell#show ip pim rp 229.1.2.1
Group RP
229.1.2.1 165.87.20.4
show ip pim snooping interface
Display information on VLAN interfaces with PIM-SM snooping enabled.
Syntax
show ip pim snooping interface [vlan vlan-id]
Parameters
vlan vlan-id (OPTIONAL) Enter a VLAN ID to display information about a
specified VLAN configured for PIM-SM snooping. The valid
VLAN IDs range is from 1 to 4094.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.5(0.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.4.1.1 Introduced on the E-Series ExaScale.
Usage
Information
The following describes the show ip pim snooping interface commands
shown in the following example.
Field Description
Interface Displays the VLAN interfaces with PIM-SM snooping
enabled.
Ver/Mode Displays the PIM version number for each VLAN interface
with PIM-SM snooping enabled:
• v2 = PIM version 2
• S = PIM Sparse mode
Nbr Count Displays the number of neighbors learned through PIM-SM
snooping on the interface.
DR Prio Displays the Designated Router priority value configured on
the interface (ip pim dr-priority command).
1254
PIM-Sparse Mode (PIM-SM)