Administrator Guide

Version Description
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage
Information
This feature is advertised to BGP neighbors through a capability advertisement. In
Receiver Only mode, BGP saves the advertised routes of peers that support this
capability when they restart.
BGP graceful restart is active only when the neighbor becomes established.
Otherwise it is disabled. Graceful-restart applies to all neighbors with established
adjacency.
This command automatically restarts the BGP instance for the configuration to
take effect.
bgp log-neighbor-changes
Enable logging of BGP neighbor resets.
Syntax
bgp log-neighbor-changes
To disable logging, use the no bgp log-neighbor-changes command.
Defaults Enabled
Command
Modes
ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information
To view BGP neighbor resets, use the show logging command in EXEC mode.
The bgp log-neighbor-changes command appears in the show config
command output.
Related
Commands
show logging — views logging settings and system messages logged to the system.
Border Gateway Protocol
379