Administrator Guide

show ip bgp cluster-list
View BGP neighbors in a specific cluster.
Z-Series
Syntax
show ip bgp [ipv4 {multicast | unicast} | ipv6 unicast]
cluster-list [cluster-id]
Parameters
ipv4 multicast (OPTIONAL) Enter the keywords ipv4 followed by the
keyword multicast to view information related only to ipv4
multicast routes.
ipv4 unicast (OPTIONAL) Enter the keyword ipv4 followed by the
keyword
unicast to view information related only to ipv4
multicast routes.
ipv6 unicast (OPTIONAL) Enter the keyword ipv6 followed by the
keyword
unicast to view information related to only to the
ipv6 unicast routes.
cluster-id (OPTIONAL) Enter the cluster id in dotted decimal format.
The range is 1 — 4294967295.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Added the ipv4 multicast and ipv6 unicast parameters.
9.4.(0.0) Added support for VRF.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage
Information
The following describes the show ip bgp cluster-list command shown in
the following example.
Border Gateway Protocol
443