Administrator Guide

show hardware layer3
Display Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.
Syntax
show hardware layer3 {acl | qos} stack-unit number port-set 0–0
Parameters
acl | qos Enter either the keyword acl or the keyword qos to select
between ACL or QoS data.
stack-unit
number
Enter the keywords stack-unit then a number to select a
stack ID. The range is from 0 to 7.
port-set 0–0 Enter the keyword port-set with a port-pipe number. The
range is from 0 to 1.
Defaults none
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.0 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
show hardware stack-unit
Display the data plane or management plane input and output statistics of the designated component of
the designated stack member.
Syntax
stack-unit <id> {cpu data-plane statistics | cpu management
statistics | [ drops [unit number [port 1-104] | user-port
0-127] | fpga register | party-bus statistics | stack-port |
ti-monitor | unit 0-1 {counters | details | port-stats [detail]
| register}}
Parameters
stack-unit
stack-unit
{command-
option}
Enter the keywords stack-unit to select a particular stack
member and then enter one of the following command
options to display a collection of data based on the option
entered. The range is from 0 to 7.
528
Debugging and Diagnostics