Administrator Guide

sflow-collector : 0
snmp : 0
ssh : 0
syslog : 0
tacacs : 0
telnet : 0
tftp : 0
show management application pkt-fallback-cntr
Display the number of packets for each application type that have been rerouted to the default routing
table due to management port or route lookup failure.
Z9000
Syntax
show management application pkt—fallback-cntr
Defaults None.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2.(0.0) Introduced on the Z9000, S4810, and S4820T.
Example
Dell#show management application pkt-fallback-cntr
dns : 0
ftp : 0
ntp : 0
radius : 0
sflow-collector : 0
snmp : 0
ssh : 2
syslog : 0
tacacs : 0
telnet : 0
tftp : 0
Port Channel Commands
A Link Aggregation Group (LAG) is a group of links that appear to a MAC client as if they were a single link
according to IEEE 802.3ad. In Dell Networking OS, a LAG is referred to as a Port Channel.
• For the S-Series and Z9000, the maximum port channel ID is 128 and the maximum members per
port channel is 16.
Because each port can be assigned to only one Port Channel, and each Port Channel must have at least
one port, some of those nominally available Port Channels might have no function because they could
Interfaces
727