Administrator Guide

Version Description
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the C-Series and E-Series.
Example
Dell#show boot system stack-unit 1
Current system image information in the system:
=============================================
Type Boot Type A B
---------------------------------------------------------------
-
Stack-unit 1 FLASH BOOT 9-0(2-1) 9-0(2-0)
[boot]
Dell#
show bootvar
Display the variable settings for the boot parameters.
Syntax
show bootvar
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.4 Output expanded to display current reload mode (normal or
Jumpstart).
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Example
Dell#show bootvar
PRIMARY IMAGE FILE = system://B
SECONDARY IMAGE FILE = tftp://10.16.127.35/Dell-SI-9-0-2-0.bin
DEFAULT IMAGE FILE = system://A
LOCAL CONFIG FILE = variable does not exist
76
File Management