Administrator Guide

Table Of Contents
To delete a specific static route, use the no ip route destination mask
command.
To delete all routes matching a certain route, use the no ip route
destination mask
command.
Parameters
destination Enter the IP address in dotted decimal format of the
destination device.
mask Enter the mask in the slash prefix format (/x) of the
destination IP address.
ip-address Enter the IP address of the forwarding router in dotted
decimal format.
interface Enter one of the following keyword followed by the slot/port
number:
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
For a Loopback interface, enter the keyword loopback
then a number from 0 to 16383.
For the Management interface on the stack-unit, enter
the keyword ManagementEthernet then the slot/port
information.
The slot range is from 0 to 1. The port range
is 0.
For a port channel interface, enter the keywords port-
channel
then a number.
For a Null interface, enter the keyword null then the Null
interface number.
For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
For a tunnel interface, enter the keyword tunnel then the
tunnel interface number. The range is from 1 to 16383.
If you configure a static IPv6 route using an egress interface
and enter the ping command to reach the destination IPv6
address, the ping operation may not work. Configure the
IPv6 route using a next-hop IPv6 address in order for the
ping command to detect the destination address.
interface ip-
address
Enter the keyword interface then the IP address.
distance (OPTIONAL) Enter the value of the distance metric assigned
to the route. The range is from 1 to 255.
permanent (OPTIONAL) Enter the keyword permanent to specify that
the route must not be removed even if the interface assigned
to that route goes down. The route must be currently active
to be installed in the routing table. If you disable the
interface, the route is removed from the routing table.
IPv4 Routing
791