Administrator Guide

Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Usage
Information
The following describes the show ipv6 mld-host command shown in the
following example.
Field Description
Valid MLD Packets The total number of packets received and sent from the last
time the elapsed time was cleared.
Reports The total number of reports (queries and unsolicited reports
generated from joins or leaves) that have been received or
sent.
Leaves The number of Multicast leaves that have been sent.
MLDv1 queries The number of MLDv1 queries that have been received.
MLDv2 queries The number of MLDv2 queries that have been received.
Malformed
Packets
The number of MLDv1 and MLDv2 packets that do not
match the requirement for a valid MLD packet.
Example
MLD Host Traffic Counters
Elapsed time since counters cleared: 0028:33:52
Received Sent
Valid MLD Packets 97962 18036
Reports 79962 18034
Leaves ---- 0
MLDv2 Queries 18000 ----
MLDv1 Queries 0 ----
Errors:
Malformed Packets: 4510
show ipv6 route
Displays the IPv6 routes.
Syntax
show ipv6 route [ipv6-address prefix-length] [hostname] [all]
[bgp as number] [connected] [isis tag] [list prefix-list name]
[ospf process-id] [rip] [static] [summary]
Parameters
ipv6-address
prefix-length
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format
then the prefix length in the /x format. The range is from /0
to /128.
870
IPv6 Basics