Administrator Guide

Example
Dell# upgrade system tftp://10.11.8.12/dv-rainier-13 a:
00:39:32 : Discarded 1 pkts. Expected block num : 51. Received
block num: 50
!00:39:36 : Discarded 1 pkts. Expected block num : 65.
Received block num: 64
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!...................................................
...............................................................
...............................................................
.............!
93924044 bytes successfully copied
System image upgrade completed successfully.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!
Image upgraded to all
upgrade fpga-image
Use this command only on systems with SFM3 modules (and only when required by the Upgrade
Procedure in the release notes).
Z9000
Syntax
upgrade fpga-image {sfm} {all | id} [booted | flash:// | ftp: |
slot0: | tftp] file-url
Parameters
sfm Enter the keyword sfm to upgrade the FPGA on the SFMs.
all Enter the keyword all to upgrade the FPGA on all the SFMs.
id Enter the keyword id to upgrade the FPGA on all a specific
SFM.
booted Enter the path to the upgrade source. Entering <CR> updates
the FPGA from the flash.
file-url Enter the following location keywords and information to
upgrade the FPGA using an Dell Networking OS image other
than the one currently running:
• To specify an Dell Networking OS image on the internal
flash, enter flash:// file-path/filename.
• To specify an Dell Networking OS image on an FTP
server, enter ftp:// user:password@hostip/
filepath
.
• To specify an Dell Networking OS image on the external
flash on the primary RPM, enter slot0://file-path/
filename
.
• To copy a file on a TFTP server, enter tftp://hostip/
filepath/ filename
where hostip is either an IPv4
dotted decimal address or an IPv6 URI [x:x:x:x::x] format
address..
File Management
91