Administrator Guide

Field Description
Link-bundle trigger threshold Threshold value that is the checkpoint,
exceeding which the link bundle is
marked as being over utilized and
alarm is generated
Slot Slot number where the high-Gigabit
port-channel resides
npuUnit Network Processign Unit (NPU)
number where the high-Gigabit port-
channel resides
number Number of the LAG bundle
Utilization (In Percent) Traffic usage in percentage of the
packets processed by the port channel
Alarm State Indicates whether an alarm is
generated if uneven utilization of the
port channel occurred. Possible values
are Active and Inactive
Interface Slot and port number, and the type of
the member interface of the port
channel
Utilization (In Percent) Traffic usage in percentage of the
packets processed by the particular
member interface
Example
Dell#show hg-link-bundle-distribution 0 npuUnit 5 hg-port-
channel 0
hg-link-bundle trigger threshold - 60
Slot 0 npuUnit 5 hg-port-channel-0 Utilization [In Percent] -
0 Alarm State - Inactive
Interface Utilization [In Percent]
0/5:hg0 10
0/5:hg1 10
0/5:hg2 10
0/5:hg3 10
snmp-server enable traps (for High-Gigabit Port Channel)
Enable the generation of SNMP traps and notifications when the capability to examine the traffic
utilization and distribution of high-Gigabit port channel links or trunk groups is enabled. This command is
supported on the Z9000 platform.
Syntax
snmp-server enable traps [notification-type]
Link Aggregation Control Protocol (LACP)
953