Administrator Guide

To validate the software image on the flash drive after the image has been transferred to the system, but

before the image has been installed, use the verify {md5 | sha256} [ flash://]img-file [hash-value]

command in EXEC mode.

• md5: MD5 message-digest algorithm

• sha256: SHA256 Secure Hash Algorithm

• flash: (Optional) Specifies the flash drive. The default is to use the flash drive. You can just enter the

image file name.

• hash-value: (Optional). Specify the relevant hash published on i-Support.

• img-file: Enter the name of the Dell Networking software image file to validate

Examples: Without Entering the Hash Value for Verification

MD5

Dell# verify md5 flash://FTOS-SE-9.5.0.0.bin

MD5 hash for FTOS-SE-9.5.0.0.bin: 275ceb73a4f3118e1d6bcf7d75753459

SHA256

Dell# verify sha256 flash://FTOS-SE-9.5.0.0.bin

SHA256 hash for FTOS-SE-9.5.0.0.bin:

e6328c06faf814e6899ceead219afbf9360e986d692988023b749e6b2093e933

Examples: Entering the Hash Value for Verification

MD5

Dell# verify md5 flash://FTOS-SE-9.5.0.0.bin 275ceb73a4f3118e1d6bcf7d75753459

MD5 hash VERIFIED for FTOS-SE-9.5.0.0.bin

SHA256

Dell# verify sha256 flash://FTOS-SE-9.5.0.0.bin

e6328c06faf814e6899ceead219afbf9360e986d692988023b749e6b2093e933

SHA256 hash VERIFIED for FTOS-SE-9.5.0.0.bin

Getting Started