Reference Guide

1046 | Security
www.dell.com | support.dell.com
If the key parameter in the radius-server host command is configured, the key configured with the
radius-server key command is the default key for all RADIUS communications.
Related
Commands
radius-server retransmit
c e s z
Configure the number of times the switch attempts to connect with the configured RADIUS host server
before declaring the RADIUS host server unreachable.
Syntax
radius-server retransmit retries
To configure zero retransmit attempts, enter no radius-server retransmit. To return to the default
setting, enter radius-server retransmit 3.
Parameters
Defaults
3 retries
Command Modes
CONFIGURATION
Command History
Related
Commands
radius-server timeout
c e s z
Configure the amount of time the RADIUS client (the switch) waits for a RADIUS host server to reply
to a request.
Syntax
radius-server timeout seconds
To return to the default value, enter no radius-server timeout.
Parameters
Defaults
5 seconds
Command Modes
CONFIGURATION
radius-server host Configure a RADIUS host.
retries
Enter a number of attempts that FTOS tries to locate a RADIUS server.
Range: zero (0) to 100.
Default: 3 retries.
Version 8.3.11.1 Introduced on Z9000
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
pre-Version 6.2.1.1 Introduced on E-Series
radius-server host Configure a RADIUS host.
seconds
Enter the number of seconds between an unsuccessful attempt and the FTOS times
out.
Range: zero (0) to 1000 seconds.
Default: 5 seconds.