Reference Guide

1092 | sFlow
www.dell.com | support.dell.com
Example
Figure 39-2. show sflow Command Example
Usage
Information
The dropEvent counter (sFlow samples dropped due to sub-sampling) shown in the figure above will
always display a value of zero.
show sflow linecard
c e s z
Display the sFlow information on a line card.
Syntax
show sflow linecard {slot number}
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 39-3. show sflow linecard Command Example
FTOS#show sflow
sFlow services are enabled
Global default sampling rate: 32768
Global default counter polling interval: 20
1 collectors configured
Collector IP addr: 133.33.33.53, Agent IP addr: 133.33.33.116, UDP port: 6343
0 UDP packets exported
0 UDP packets dropped
165 sFlow samples collected
0 sFlow samples dropped due to sub-sampling
Linecard 1 Port set 0 H/W sampling rate 8192
Gi 1/16: configured rate 8192, actual rate 8192, sub-sampling rate 1
Gi 1/17: configured rate 16384, actual rate 16384, sub-sampling rate 2
Linecard 3 Port set 1 H/W sampling rate 16384
Gi 3/40: configured rate 16384, actual rate 16384, sub-sampling rate 1
FTOS#
This count is always zero (0)
slot number
(OPTIONAL) Enter a slot number to view information on the line card in that slot.
Range: 0 to 13 on a E1200, 0 to 6 on a E600/E600i, and 0 to 5 on a E300.
Version 8.3.11.1 Introduced on Z9000
Version 8.2.1.0 Introduces on S-Series Stacking
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.7.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
Version 6.2.1.1 Introduced on E-Series
FTOS#show sflow linecard 1
Linecard 1
Samples rcvd from h/w :165
Samples dropped for sub-sampling :0
Total UDP packets exported :0
UDP packets exported via RPM :77
UDP packets dropped :
FTOS#