Reference Guide

1096 | Simple Network Management Protocol and Syslog
www.dell.com | support.dell.com
show snmp group
c e s z
Display the group name, security model, status, and storage type of each group.
Syntax
show snmp group
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
Information
The following example displays a group named ngroup. The ngroup has a security model of version 3
(v3) with authentication (auth), the read and notify name is nview with no write view name
specified, and finally the row status is active.
Example
Figure 40-3. show snmp group Command Example
Related
Commands
show snmp user
c e s z
Display the information configured on each SNMP user name.
Syntax
show snmp user
Command Modes
EXEC
EXEC Privilege
Example
Figure 40-4. show snmp user Command Example
Version 8.3.11.1 Introduced on Z9000
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
E-Series legacy command
FTOS#show snmp group
groupname: ngroup security model: v3 auth
readview : nview writeview: no write view specified
notifyview: nview
row status: active
FTOS#
snmp-server group Configure an SNMP server group
FTOS#show snmp user
User name: v1v2creadu
Engine ID: 0000178B02000001E80214A8
storage-type: nonvolatile active
Authentication Protocol: None
Privacy Protocol: None
FTOS#